Individual / Pumping station
Residential solution


-Automated Pumping Station: Custom-Built

The pumping station is also used to pump treated water to the discharge point or storage basin for re
, as needed.

Automated pumps — no manual intervention required
Certified leak-proof tank — complete floor protection
Integrated monitoring and alert system
Request a free consultation
Schematic of the Tx-H2O pumping station — residential installation
Wastewater collection
Automatic pumping
Discharge into the sump
How it works

A simple, fully automated system:

When gravity isn't enough, the lift station automatically takes over—no manual intervention is required on a daily basis.

01
Collection

Domestic wastewater is routed to the station’s underground, watertight tank, which is sized to accommodate your daily flow.

02
Automatic pumping

As soon as the level reaches the set threshold, the pumps activate automatically. Sensors continuously monitor the system's operation.

03
Repression

Wastewater is transported under pressure to your septic tank or the sewer system, regardless of distance or elevation.

When do you need it?

3 typical situations

01
Land below

Your home is located at the bottom of a slope, and the sewer system is higher up—the pump station easily pumps the wastewater uphill.

02
Basement or cellar

Sanitary facilities in the basement cannot drain by gravity—the pump station collects the wastewater and pumps it to the main sewer lines above ground.

03
Long distance

If your home is located far from the sewer system or a septic tank, this unit provides pressurized transport over long distances.